A few individuals think that to jailbreak 3GS iphones is not possible, but this is a fallacy. What follows is an easy step by step guide to hack and modify these models of mobile phones. After you download the required software programs you should be able to get this done in about 20 or 30 minutes.
1. Before you unlock your mobile device you need to jailbreak it and to do this you will need the genuine Apple IPSW. Plug in the iPhone and follow that up by clicking the restore key. The screen will ask you if you agree to do a back-up of the mobile phone and then you will need to download the utility that will start the restore process. As soon as you notice the download notification pop-up on the left side of the screen, unplug the mobile phone. You don't actually want to let the restore complete; you solely need to download the IPSW file.
2. As soon as the download is finished, open redsn0w and then click on the browse key. In the case that you are downloading via iTunes, you must click on the file named iPhone2, 1_3.0 7A1 - you can find in your phones' library where it says iPhone Application Downloads; under user account.
3. When you click "ok" and then selecting next button, you should get to the location of the kernel in order to begin putting together the hacked firmware utilized to break the mobile device. After you finish the loading procedure you'll be asked which choices you want to load. Click the check box on the selections that say "Icy" and "Cydia" and select "next" to allow redsn0w to finish assembling the firmware.
4. Once the firmware is assembled, redsn0w will with no delay put your device into the DFU mode. Be cognizant that 3GS iPhones carry disparate processes with relation to DFU mode in comparison to older iPhones. Carefully observe the procedure to unhook, power off and plug in the device. Hold the button that says "home" until the iTunes logo is displayed. The utility will then start the process of hacking the phone.
5. Once the unlock process comes to an end, hook up to Wi-Fi and then load up the Icy screen. You may have to wait for the tap sources. As soon as the checking sources completes, then tap the button that says "edit" at the top left section of the screen and next hit the plus key at the top right corner. After this, click the button labelled "add" to input: http://repo666.ultrasn0w.com inside the source location. Pick the bigger add button in order to complete the source add-on. Press the refresh key on left in order to verify the code that was just installed.
6. During the time that you have the Icy app open, you ought to go toward the bottom of the screen and hit the button that says "Utilities". Ensure that you choose "Utilities", not "Utility". At the end of the utilities screen "ultrasn0w" should be seen". Click this and then Click "Install". After this finishes, your jailbreak 3GS is finished - restart the device and you are good to go!
1. Before you unlock your mobile device you need to jailbreak it and to do this you will need the genuine Apple IPSW. Plug in the iPhone and follow that up by clicking the restore key. The screen will ask you if you agree to do a back-up of the mobile phone and then you will need to download the utility that will start the restore process. As soon as you notice the download notification pop-up on the left side of the screen, unplug the mobile phone. You don't actually want to let the restore complete; you solely need to download the IPSW file.
2. As soon as the download is finished, open redsn0w and then click on the browse key. In the case that you are downloading via iTunes, you must click on the file named iPhone2, 1_3.0 7A1 - you can find in your phones' library where it says iPhone Application Downloads; under user account.
3. When you click "ok" and then selecting next button, you should get to the location of the kernel in order to begin putting together the hacked firmware utilized to break the mobile device. After you finish the loading procedure you'll be asked which choices you want to load. Click the check box on the selections that say "Icy" and "Cydia" and select "next" to allow redsn0w to finish assembling the firmware.
4. Once the firmware is assembled, redsn0w will with no delay put your device into the DFU mode. Be cognizant that 3GS iPhones carry disparate processes with relation to DFU mode in comparison to older iPhones. Carefully observe the procedure to unhook, power off and plug in the device. Hold the button that says "home" until the iTunes logo is displayed. The utility will then start the process of hacking the phone.
5. Once the unlock process comes to an end, hook up to Wi-Fi and then load up the Icy screen. You may have to wait for the tap sources. As soon as the checking sources completes, then tap the button that says "edit" at the top left section of the screen and next hit the plus key at the top right corner. After this, click the button labelled "add" to input: http://repo666.ultrasn0w.com inside the source location. Pick the bigger add button in order to complete the source add-on. Press the refresh key on left in order to verify the code that was just installed.
6. During the time that you have the Icy app open, you ought to go toward the bottom of the screen and hit the button that says "Utilities". Ensure that you choose "Utilities", not "Utility". At the end of the utilities screen "ultrasn0w" should be seen". Click this and then Click "Install". After this finishes, your jailbreak 3GS is finished - restart the device and you are good to go!
About the Author:
The author is an inveterate tennis player who, after a recently injury, began writing. His current obsessions include reviewing ways to jailbreak 3gs. Read his favorite article on how to jailbreak 3g phones here.
0 comments:
Post a Comment